November, 2021 we assembled a 40 x 80 Can Industrial in Burlington, Ontario
Category: Shelter Assemblies
Cover-Tech Shelter Assemblies: 30 x 60 x two
Two Cover-Tech Shelters
In December, 2020 we installed two 30′ x 60′ Cover-Tech shelters at Pearson Airport. The shelters are intended for use with tractor trailers. To achieve greater height the shelters were installed on 3′ concrete blocks.
See the video below.
Link to Client’s Comments
Frequently Asked Questions:
How difficult is it to assemble a Cover-Tech shelter?
Assembly difficulty depends on: the size of the shelter, the equipment you have available and the weather. A larger shelter, (more than 20′ wide) will have heavier frame pieces and a heavier fabric to pull over the frame. A carport shelter can be assembled with 12′ step ladders and normal hand tools. A larger shelter job is made easier with a two man lift.
Although a shelter frame can be assembled on a windy day the job of pulling the fabric cover over the frame is harder and potentially dangerous in a high wind.
How many does it take to assemble a Cover-tech shelter?
A carport shelter can easily be assembled by two people in an afternoon. Larger shelters may require a crew of four.
What equipment will we need to assemble a Cover-Tech shelter?
Our crews normally use a two man lift, a scissor lift and a
Bobcat.
Will we need a building permit?
If the shelter is deemed a “temporary” structure you will not likely need a building permit . But, if the local building inspector observes the structure still in place two years after it was assembled a permit may be required.
